Opscraft
IP addressing & subnetting · Lesson 2 of 9 · 3 min read

Classful addressing

The five classes

Before 1993, the first bits of an address fixed its class and therefore its network size:

Class Leading bits First octet Default mask Networks Hosts per network Use
A 0 1–126 255.0.0.0 (/8) 126 16,777,214 Very large networks
B 10 128–191 255.255.0.0 (/16) 16,384 65,534 Medium
C 110 192–223 255.255.255.0 (/24) ~2 million 254 Small
D 1110 224–239 — — — Multicast
E 1111 240–255 — — — Experimental/reserved
  • 127.x.x.x is excluded from Class A: it's loopback (127.0.0.1 = this host). That's why Class A is listed as 1–126.
  • 0.x.x.x means "this network" (0.0.0.0 = any address / unspecified; as a route, 0.0.0.0/0 = default route).
  • The class boundary is easy to remember by first octet: A < 128, B < 192, C < 224, D < 240.
Enlarge diagramA · 1-126 · /8B · 128-191 · /16C · 192-223DE0128192224240255127 = loopbackD = multicast · E = reserved
Figure 1. The old address classes, by first octet. Classes are history, but the ranges still come up in interviews.
Swipe sideways to see all of it, or tap to open it full screen.

Why classes were abandoned

Class sizes were wildly mismatched with real needs: an organisation needing 500 addresses got a Class B (65,534) and wasted 99%, or several Class Cs that bloated routing tables. CIDR — Classless Inter-Domain Routing (1993) replaced classes: any prefix length can be used (/22, /27...), and contiguous blocks can be aggregated into one route. Today classes survive as vocabulary, in some old tools' default masks, and in interview questions — they explain why 10.0.0.0/8, 172.16.0.0/12 and 192.168.0.0/16 look the way they do.